Blower Motor Rotor Winding Machine Brushless DC Motor Needle Outer Winding Machine
Model: ND-R2SW02
This motor winding machine is suitable for winding operation of blower motor rotor and other brushless motor outer rotor. The whole machine adopts needle winding method, manual loading and unloading, automatic clamping, winding, clamping and cutting; clamping and cutting, wire part The structure is compact and can be completed at one time. Two brushless rotors will be wound in each action cycle, which greatly improves the production efficiency. Equipped with a servo motor control system to realize product winding. The man-machine interface has functions such as fault diagnosis, output count and storage, and can set parameter settings such as automatic winding, multi-wire winding, automatic indexing, automatic slot crossing, winding speed, etc.; simple operation and high production efficiency.
Basic Specification
Product Name: Brushless DC Motor Motor Rotor Needle Winding Machine
Brushless rotor inner diameter: φ20—φ80 mm (other specifications can be specially designed)
Brushless rotor outer diameter: φ50—φ120 mm (other specifications can be specially designed)
Adapted wire diameter: φ0.5—φ1.5mm (other specifications can be specially designed)
Applicable pole number: multi-pole
Motor winding method: needle winding machine
Winding station: two
Stack thickness range: 10-80mm (standard stroke) 100-200mm (long stroke, special customization)
Speed range: 0-300 RPM adjustable
Servo mechanism: 2 sets of 4.4KW indexing motors; 1 set of 3KW winding motor with brake; 2 sets of 750W and wire winding motors
Power source: 380V/50HZ three-phase four-wire
Compressed air pressure: 0.5-1MPa
Total power: 20KW
Size: 1200*1360*1800 (length * width * height) not including wire stand
Weight: 600KG
Production Process
This motor winding machine is suitable for blower motor rotor and other brushless motor outer rotor
Technical Proposal
Machine Features
1. This brushless motor needle winding machine is used for multi-pole brushless motor rotor winding, manual loading and unloading, automatic clamping, winding, clamping and cutting;
2. The frame is made of thickened 4080 aluminum profile, and the table top is made of cast iron, which absorbs vibration, and the vibration is very small even during high-speed winding.
3. The mold fixture part adopts the downward positioning method, which is stable in positioning and reliable in tightening;
4. The clamping and cutting part has a compact structure, and the clamping and cutting can be completed at one time;
5. Different stators and winding parameters can be quickly switched through the man-machine interface to adapt to the requirements of different stators
6. Different models of molds can be changed quickly; (if you are proficient, it can be completed in 20 minutes)
7. All aluminum alloy protection;
8. PLC control, fault display
9. The tension of the thread is moderate, there is no damage to the thread, no disconnection and other phenomena.
10. Do a salt water test for the coiled product, within 10 mA per minute,
11. Equipment safety indicators comply with CE standards.
12. Efficiency: 120 rpm,
13. Beat: 5 minutes/stator;
14. Noise: Below 60-70 decibels.
Product Video
Attachment
