Basic Specification

Stator inner diameter: 30~100mm
Stator outer diameter: maximum 150mm
Stator stack thickness: 16-100mm
Cylinder displacement: 20F
Power: 4.5KW
Equipment weight: about 1000Kg
Voltage: 380V/50Hz
Dimensions: L1300*W1000*H2400mm

Production Process

Suitable for WeChat induction motors such as air conditioner motors, washing motors, compressor motors, fan motors, generator motors, pump motors, etc.

Machine Features

Full hydraulic system, industrial PLC design;
Five oil cylinders work independently to achieve outsourcing, internal expansion and end profiling
Meet the production cycle ≤14S/set (not including loading and unloading);
The pass rate of one-time whole copper wire is ≥98.5%, and the pass rate after repair is ≥99.5%;
When replacing stators with different stack thicknesses, it can be achieved only by replacing the adjusting washers;
The end and inner and outer diameter sizes can be basically close to the final size of the stator shaping drawing, but not as the final shaping size, which is convenient for tying;
The slot insulation and slot wedges must not be damaged or turned over, and the iron core must not be deformed or warped teeth due to plastic shaping, and there is no paint damage;
Adopt safety grating protection mechanism, stand operation, start with two-hand buttons;