Basic Specification

Stator inner diameter: 40~100mm

Stator outer diameter: up to 160mm

Stator stack thickness: 30~160mm

Wire package height: ≤65mm

Lashing method: slot-by-slot/slot/fancy lashing

Lashing speed: 0.5s/s

Power supply: 380V/50/60HZ 3.5KW

Equipment weight: about 600kg

Dimensions: L1500*W650*H1700mm

Production Process

It is suitable for miniature induction motors such as air conditioner motors, washing motors, compressor motors, fan motors, generator motors, and pump motors.

Technical Proposal

Full servo servo system, CNC control system design, man-machine interface;

The indexing adopts a servo system, which can be set for each slot, compartment, slot hopping and fancy lashing;

The spindle adopts a servo control system, and the speed can be set;

The two needles are controlled by a servo and tied up and down together

Automatic feeding, automatic thread trimming, no need for knotting;

Quickly adjust the transfer capacity of stators with different stack thicknesses. The stack thickness range is 50-130mm

With wire feeding and tension device, the tightness of the binding wire can be adjusted;

Production cycle ≤1S/slot;

The binding wire must not be tied or broken, and the paint film must not be damaged;

The pass rate of one-time binding is ≥98.5%; the pass rate after repair is ≥99.5%;

Adopt safety protection mechanism, stand operation.

Start with one-handed button