中文 |
  • Current > 
  • Product Introduction > 
  •  Induction equipment> 
  • Vertical winding machine
  • Vertical winding machine

    This equipment is suitable for stator winding of 2-stage, 4-pole, and 6-stage motors.

  • Basic Specification

    Number of winding heads: 1
    Adapt to wire diameter: 0.2~1.2mm
    Winding speed: ≤2500RPM
    Maximum stator outer diameter: 160mm
    Maximum stator stack thickness: 100mm
    Flying fork diameter: ¢300mm
    Number of skip stages: 1~5
    Power supply: 380V/50/60HZ
    Power: 7KW
    Equipment weight: about 1000kg
    Dimensions: L2400*W1000*2450mm

  • Production Process

    Suitable for winding of 2-level, 4-pole, and 6-level motors.

  • Technical Proposal

  • Machine Features

    Winding mold: Each set contains a set of winding molds and three wire cups;
    The double-station structure of the turntable adopts servo system rotation and hanging cup indexing;
    The number of winding heads is 1, which must meet the requirements of double-wire parallel winding;
    The main shaft is controlled by a servo motor, and the accuracy of the number of turns of the coil is ±1 turn;
    The working speed can be set arbitrarily, and the whole machine has no obvious vibration or noise;
    The enameled wire will not be broken or broken, and the enameled wire will stop automatically after use;
    The controller can set the number of turns, winding speed, sinking height, sinking speed, winding direction, etc.;
    The XY axis of thread hooking and trimming adopts servo system movement, which can adjust the length of bridge wire and lead wire;
    The sinking mold adopts servo system to move, and the maximum number of sinking mold segments is 5;

  • Product Video

  • Attachment

  • Back to Catalog
    网站流量监控代码