This brushless motor stator winding machine is specially designed for the outer slot stator winding of the brushless fan motor. The whole machine adopts the needle winding method. Each action cycle will wind 2 brushless stators. The production efficiency is greatly improved. It is equipped with a servo. The motor control system realizes product winding. The man-machine interface has functions such as fault diagnosis, output count and storage, and can set parameter settings such as automatic winding, multi-wire winding, automatic indexing, automatic slot crossing, winding speed, etc.; simple operation and high production efficiency.
Product Name: Fully Automatic Brushless DC Motor Motor Stator Needle Winding Machine
Stator inner diameter: φ20—φ80 mm (other specifications can be specially designed)
Stator outer diameter: φ50—φ120 mm (other specifications can be specially designed)
Adapted wire diameter: φ0.5—φ1.5mm (other specifications can be specially designed)
Applicable pole number: multi-pole
Motor winding method: needle winding machine
Winding station: two
Stack thickness range: 10-80mm (standard stroke) 100-200mm (long stroke, special customization)
Speed range: 0-300 RPM adjustable
Power source: 380V/50HZ three-phase four-wire
Compressed air pressure: 0.5-1MPa
Total power: 20KW
Size: 1200*1360*1800 (length * width * height) not including wire stand
This motor stator winding machine is suitable for the manufacture of brushless motor stators, such as fan motors, desktop fan motors, exhaust fan motors, manual generators, radiator fan motors, blower motors, etc.
This brushless motor needle winding machine is used for multi-pole brushless motor stator winding, manual loading and unloading, automatic clamping, winding, clamping and cutting;
All aluminum alloy protection; the frame is made of thick aluminum profile, the table top is made of cast iron, which absorbs vibration, and the vibration is very small even during high-speed winding.
The mold fixture part adopts the downward positioning method, which is stable in positioning and reliable in tightening;
The clamping and cutting part has a compact structure, and the clamping and cutting can be completed at one time;
Different stators and winding parameters can be quickly switched through the man-machine interface to adapt to the requirements of different stators
Can quickly change different models of molds; (if you are proficient, it can be completed in 20 minutes)
PLC control, fault display
Equipment safety indicators comply with CE standards.
Efficiency: 120 revolutions per minute,
Beat: 5 minutes/stator;
Noise: Below 60-70 decibels.